Fluke                                                       MET/CAL Procedure
=============================================================================
INSTRUMENT:            AVO VEHICLE TEST 2002: (1 year) CAL VER /5520
DATE:                  27-Aug-97
AUTHOR:                Fluke Corporation
REVISION:              $Revision: 1.1 $
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       8
NUMBER OF LINES:       71
CONFIGURATION:         Fluke 5520A
=============================================================================
#
# Source:
#   Specifications
#
# Compatibility:
#   5500/CAL 5.0 or MET/CAL 5.0 or later
#
# Subprocedures:
#   None
#
# Required Files:
#   None
#
# System Specifications:
#   TUR calculation is based on specification interval of the accuracy file.
#   The default 5520A accuracy file contains 90 day specs.
#
# Fluke makes no warranty, expressed or implied, as to the fitness
# or suitability of this procedure in the customer's application.
#
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  DISP         {Procedure not formally tested with UUT.}
  1.001  DISP         {See procedure README file.}
  1.002  ASK-         N              P J                          F        W
  1.003  ASK+           K
  1.004  HEAD         PRELIMINARY INSTRUCTIONS
  1.005  DISP         [32]                   WARNING
  1.005  DISP         HIGH VOLTAGE is used or exposed during the performance
  1.005  DISP         of this calibration. DEATH ON CONTACT may result if
  1.005  DISP         personnel fail to observe safety precautions.
  1.006  HEAD         {RESISTANCE TESTS}
  1.007  DISP         Connect the 5520A and the UUT as follows:
  1.007  DISP         [32] 5520A AUX Hi to UUT +
  1.007  DISP         [32] 5520A AUX LO to UUT -
  1.007  DISP         [32] 5520A NORMAL Hi to UUT +
  1.007  DISP         [32] 5520A NORMAL LO to UUT -
  1.008  HEAD         RESISTANCE TESTS: {2000 Ohm Range}
  1.009  5520   2000  1000Z          1.0% 1U                               CW
  2.001  HEAD         RESISTANCE TESTS: {200 kOhm Range}
  2.002  5520   200   100.0kZ        1.0% 0.1U                             CW
  3.001  HEAD         {DC VOLTAGE TEST}
  3.002  DISP         Connect the 5520A and the UUT as follows:
  3.002  DISP         [32] 5520A NORMAL Hi to UUT +
  3.002  DISP         [32] 5520A NORMAL LO to UUT -
  3.003  HEAD         DC VOLTAGE TEST: {200V Range}
  3.004  5520   200   190.0V         0.5% 0.1U                             2W
  4.001  HEAD         {AC VOLTAGE TESTS}
  4.002  HEAD         AC VOLTAGE TESTS: {500V Range}
  4.003  5520   500   490.0V         0.5% 0.3U     60H            SI       2W
  5.001  5520   500   490.0V         0.5% 0.3U     100H           SI       2W
  6.001  HEAD         {DIODE TEST}
  6.002  DISP         [32]         Set UUT to DIODE TEST
  6.003  5520         1900mV         2.0% 1U                               2W
  7.001  HEAD         {DC CURRENT TEST}
  7.002  DISP         Connect the 5520A and the UUT as follows:
  7.002  DISP         [32] 5520A 20A Hi to UUT 20A
  7.002  DISP         [32] 5520A AUX LO to UUT -
  7.003  HEAD         DC CURRENT TEST: {20A Range}
  7.004  5520   20    19.00A         1.0% 0.02U                      HC    2W
  8.001  END